命令ipaccess-list resequence Worker5010-------------- 示例交换机Catalyst 9300版本 17.0当前ACL序号如下Cisco9300#sh ip access-lists WorkerExtended IP access list Worker1permitiphost1.1.1.1host10.248.1.12permitiphost1.1.1.2host10.248.1.13permitiphost1.1.1.3host10.248.1.14permitiphost1.1.1.4host10.248.1.15permitiphost1.1.1.5host10.248.1.16permitiphost1.1.1.6host10.248.1.1如果要在第2条前面插入1条但是会报错 2已经存在Cisco9300(config)# ip access-list extended WorkerCisco9300(config-ext-nacl)#2 permit ip host 2.2.2.2 host 10.248.1.1% Duplicate sequence number % Failed toaddace to access-list下面进行排序编号从50开始步长为10Cisco9300(config)#ip access-list resequence Worker 50 10排序后结果Cisco9300(config)#do sh ip access-list WorkerExtended IP access list Worker50permitiphost1.1.1.1host10.248.1.160permitiphost1.1.1.2host10.248.1.170permitiphost1.1.1.3host10.248.1.180permitiphost1.1.1.4host10.248.1.190permitiphost1.1.1.5host10.248.1.1100permitiphost1.1.1.6host10.248.1.1
